Grinders & Cut-Offs
Showing all 12 results
-
Fox® #4 Dead Shaft Swing Frame Grinder
The Dead Shaft High Speed Swing Frame Grinder is rugged, heavy-duty, high speed grinder with full lateral movement for use in foundries and steel mills. The Fox #4 is a high speed, dead shaft grinder with full lateral movement and is ideal for grinding castings, billets, ingots, and forgings.
-
Fox® 10-CG Swing Frame Grinder
Fox® 10-CG Swing Frame Grinder is a light swing grinder with an overhung shaft type to accommodate a 12 in (305 mm) diameter wheel. Excellent for casting cleanup with low metal removal and for small forgings, especially inspection work in mills or foundries.
-
Fox® 1090 Swing Frame Grinder
1090 Swing Frame Grinders offer excellent visibility and outstanding maneuverability. With the wheel turned 90 degrees from the typical swing grinder, the operator has much better visibility while grinding. A superior Hanger System allows for a perfectly balanced machine. It can be easily rotated for grinding on either side of a casting.
-
Fox® 18-95 Cup Wheel Swing Frame Grinder
Cup Wheel Swing Frame Grinders are used for grinding gate stubs, riser pads, parting lines and core fins. The unit provides a smoother finish comparable to swing frame grinders with type 1, straight wheels and generally out performs portable grinders 3 to 1.
-
Fox® 4-CG Swing Frame Grinder
Fox® 4-CG Swing Frame Grinder is a rugged, heavy-duty grinder with full lateral movement for use in foundries and steel mills.
-
Fox® 8-CG Swing Frame Grinder
Fox® 8-CG Swing Frame Grinder is a rugged, dependable light grinder widely used for grinding small billets and forgings.
-
Fox® Air Float Cut-Off Machine 4PMC-AF
The Fox® Air Float Cut-Off machine is ideal for gate and riser removal on small to medium size castings, or castings on runner bars or trees. The system excels at cutting castings produced in small to medium runs, because fixtures are easy to change. The machine also is well suited for cutting off castings that are too heavy for operators to handle, as the air float feature makes moving several hundred pounds almost effortless.
-
Fox® Air Float Cut-Off Machine 6PMC-AF
The Fox® Air Float Cut-Off machine is ideal for gate and riser removal on small to medium size castings, or castings on runner bars or trees. The system excels at cutting castings produced in small to medium runs, because fixtures are easy to change. The machine also is well suited for cutting off castings that are too heavy for operators to handle, as the air float feature makes moving several hundred pounds almost effortless.
-
Fox® Remelt Ingot Processing System
The Fox® Remelt Ingot Processing System is an automated start-to-finish ingot processing system that can be tailored to accommodate many different configurations of equipment stations.
-
Protected: Fox® SuperAbrasive Stand Grinder – SA23
The Fox® SA23 Superabrasive Stand Grinder provides extraordinary robustness, unparalleled performance and longevity. Used for the grinding of Grey or Ductile Iron Castings, it can be used in manual operations, semiautomatic, or robotic applications.
-
VTS™ – Floor Mounted Model
Leading edge manipulator/robotic technology, the VTS™ (Vulcan Tactile System) is a telemanipulator using an Industrial Robot. This machine provides 3 modes of operation – Manual, Semi-Automatic, Fully Automatic.
The use of our specialized hand control system allows the operator to manually control the robot, not just program it. This allows the operator to move the robot simultaneously with his movements for a true “hands on” experience.
This technology no longer requires pre-programming of the Robot to perform tasks. A library of motions is available, that is accessible by the operator, to make complex movements simple such as angular planes, radiuses, etc.
-
VTS™ – Gantry Mounted Model
Leading edge manipulator/robotic technology, the VTS™ (Vulcan Tactile System) is a telemanipulator using an Industrial Robot. This machine provides 3 modes of operation – Manual, Semi-Automatic, Fully Automatic.
The use of our specialized hand control system allows the operator to manually control the robot, not just program it. This allows the operator to move the robot simultaneously with his movements for a true “hands on” experience.
This technology no longer requires pre-programming of the Robot to perform tasks. A library of motions is available, that is accessible by the operator, to make complex movements simple such as angular planes, radiuses, etc.