Grinders & Cut-Offs
Showing 17–32 of 40 results
-
Fox® 316-71 Double-End Belt Grinder
Fox® 316-71 a is double end coated abrasive belt back stand grinder.
-
Fox® 4-C Swing Frame Cut-Off Machine
The Fox® 4-C Swing Frame Cut-Off Machine is the best combination of horsepower, size and weight. These machines are fast and economical means for removing gates and risers from castings. The swing frame design allows a full 90° swing clockwise and 75° swing counterclockwise.
-
Fox® 4-CG Swing Frame Grinder
Fox® 4-CG Swing Frame Grinder is a rugged, heavy-duty grinder with full lateral movement for use in foundries and steel mills.
-
Fox® 6-C Swing Frame Cut-Off Machine
Fox® swing frame cut-off machines remove gates and risers from castings or can separate castings tied together with runner systems. When gates or risers are on flat surfaces, cuts can be made very close to the casting eliminating the need for additional grinding.
-
Fox® 8-CG Swing Frame Grinder
Fox® 8-CG Swing Frame Grinder is a rugged, dependable light grinder widely used for grinding small billets and forgings.
-
Fox® Air Float Cut-Off Machine 4PMC-AF
The Fox® Air Float Cut-Off machine is ideal for gate and riser removal on small to medium size castings, or castings on runner bars or trees. The system excels at cutting castings produced in small to medium runs, because fixtures are easy to change. The machine also is well suited for cutting off castings that are too heavy for operators to handle, as the air float feature makes moving several hundred pounds almost effortless.
-
Fox® Air Float Cut-Off Machine 6PMC-AF
The Fox® Air Float Cut-Off machine is ideal for gate and riser removal on small to medium size castings, or castings on runner bars or trees. The system excels at cutting castings produced in small to medium runs, because fixtures are easy to change. The machine also is well suited for cutting off castings that are too heavy for operators to handle, as the air float feature makes moving several hundred pounds almost effortless.
-
Fox® Air Float Cut-Off with Horizontal Traveling Axis
The Fox® Air Float Cut-Off machine is ideal for gate and riser removal on small to medium size castings, or castings on runner bars or trees. The system excels at cutting castings produced in small to medium runs, because fixtures are easy to change. The machine also is well suited for cutting off castings that are too heavy for operators to handle, as the air float feature makes moving several hundred pounds almost effortless.
The Air Float Cut-Off with Horizontal Traveling Axis is a specially designed cut-off system that provides control of the saw with joysticks from a Control Panel located outside of the machine enclosure.
-
Fox® Multi-Axis Casting Positioner
The Fox® multi-axis positioners consist of a powered rotary work plate with the ability to integrate clamping depending on the casting type/size and the customers’ needs. Quick-change jaws can be integrated to allow for rapid adjustment to hold a large variety of castings with minimal set-up.
These positioners also have a pivoting axis for tilting of the casting for better presentation to the operator. The unit will allow a heavy casting to be quickly clamped onto the table and then easily positioned for various processing operations or inspection. Typically, the unit is used with a swing frame cut-off, a swing frame grinder, and/or small hand tools, but can be used with manipulator finishing systems such as the VTS™ as well.
Positioners allow you to position your casting the way you need it to maximize your productivity
- Grind with any of Fox’s Swing Frame Grinders with metal removal rates five to ten times greater than with hand grinders.
- Cut with any of Fox’s Swing frame Cut-Off machines
- Proper positioning during cutting reduces the need for subsequent grinding.
- Use with any type of hand tool
- Casting is easily accessible and maneuverable for inspection
- Eliminates multiple handling operations
- Reduces work space requirements
- Increases throughput in your cleaning room
- Additional clamping option available
- Easily adjustable and replaceable chin
- Lock valve secured to the cutting or grinding process of the workpiece
-
Fox® Overhead Traveling Grinder
Fox® Overhead Traveling Grinder for spot grinding and ingot clean-up. This system is remotely operated reducing fatigue to the operator. With the primary controls at the operator’s fingertips and his ability to operate the system in a standing position, his fatigue will be significantly reduced when compared with the swing frame setup. The wireless control station is designed for ease of operation, as well as allowing the operator to move along the work piece for close visual inspection of areas being ground and yet be isolated from the machine eliminating transmission of vibration through handlebars. The controls will allow “feathering” of the areas being spot ground.
-
Fox® Remelt Ingot Processing System
The Fox® Remelt Ingot Processing System is an automated start-to-finish ingot processing system that can be tailored to accommodate many different configurations of equipment stations.
-
Fox® Round Parts Grinder
Fox® Round Parts Grinders are available as Automatic or Semi-Automatic grinding of the outside diameter of round castings.
-
Fox® Semi-Automatic Compliant Belt Grinder
Developed from Vulcan’s Robotic Grinding compliant technology, the system provides high metal removal rates by applying the correct grinding force throughout the process. Much faster than traditional rise and fall table grinding technology.
-
Protected: Fox® SuperAbrasive Stand Grinder – SA23
The Fox® SA23 Superabrasive Stand Grinder provides extraordinary robustness, unparalleled performance and longevity. Used for the grinding of Grey or Ductile Iron Castings, it can be used in manual operations, semiautomatic, or robotic applications.
-
Mid-West Machine™ 3000 Ingot End Grinder
This specially designed machine can grind billets, blooms, slabs, squares, round cornered squares, octagons or rounds and are readily adapted to automated material handling equipment.
State of the art solid state controls, automatic travel systems, anti-penciling systems, constant horsepower or constant force and ease of operation with a minimum of down time make Mid-West Machine ™ the logical choice for your conditioning requirements.
-
Mid-West Machine™ 3000 Stationary Grinder
Stationary systems are ideally suited to high production within a reasonable, specific size range. These machines are designed to grind billets, blooms, slabs, squares, round cornered squares, octagons or rounds and are readily adapted to automated material handling equipment.
State of the art solid state controls, automatic travel systems, anti-penciling systems, constant horsepower or constant force and ease of operation with a minimum of down time make Mid-West Machine ™ the logical choice for your conditioning requirements.