Foam Molding Machine MPH 80/35-A is used for producing foam replicas from pre-expanded polystyrene beads.
Foam Molding Machine MPH 80/35-A
Foam Molding Machine MPH 80/35-A is used for producing foam replicas from pre-expanded polystyrene beads.
| Electric | 17 HP (13kW) |
|---|---|
| Vacuum | 150 M3/hour |
| Tool Mounting Flanges (outside) | 36 in x 18 in (916mm x 464mm) |
| Tool Mounting Flanges (inside) | 33 in x 14 in (840mm x 350mm) |
| Max Opening between Mounting Plates | 46 in (1180mm) |
| Max Fill Injector Connections | 15 |
-
• Horizontal operation (vertical parting line)
- One blow back air pressure regulator
- Even heat transfer to both tool faces controlled by independent steam valves
- Fixed and moving chest has adjustable water dosing system providing efficient atomization of a small quantity of water
- High power vacuum system containing liquid ring pump and accumulator designed for rapid evacuation of steam chests and stabilization of foam pressure along with minimizing foam moisture content
- Direct piped process valving providing high precision and repeatability
- PLC controls for machine functions; all process steps are freely programmed and continuously indicated on panel mounted touch screen operator interface
- Integrated automatic demolding part system provides safe, damage free handling of foam replicas
- Plain language touchscreen operator/machine interface
• Tool mounting is designed to allow for positive and quick tooling change
• Tool flange faces are stainless steel
• Variable speed and pressure compensated hydraulic system
• Four (4) oversized guide bars containing expansion compensation bearings provide quick motion, even load and plate to plate squareness with powerful locking forces
• Moving platen tool alignment set screws
• Bead fill system with transparent vessel and connections for attaching fill injectors
• Pressure fill system with fine tune regulator for producing thin wall patterns